Shandong Puchengxin Metal Materials Co., LTD.
3004 H16 Aluminium discs
3004 H16 Aluminium discs is widely used in electronics, daily chemical, medicine, culture and education and auto parts. Electrical appliances, thermal insulation, machinery manufacturing, automobile, aerospace, military, mold, construction, printing and other industries. Such as kitchen supplies such as non-stick cooker, pressure cooker, and hardware supplies such as lamp shade, water heater shell, stretching tank, etc., is one of the largest amount of aluminum alloy sheet and strip deep processing products.
Keywords:
Series:
Product Details
Chemical composition: Al: residual Si: 0.6 CuprCu: 0.05--0.2 Zinc Zn: 0.10 Manganese Mn: 1.0--1.5 Iron Fe: 0.7 Single: 0.05
Mechanical properties: Tensile strength σb (MPa) 120-160 Conditional yield strength σ0.2 (MPa) ≥85
3004 H16 Aluminium discs is widely used in electronics, daily chemical, medicine, culture and education and auto parts. Electrical appliances, thermal insulation, machinery manufacturing, automobile, aerospace, military, mold, construction, printing and other industries. Such as kitchen supplies such as non-stick cooker, pressure cooker, and hardware supplies such as lamp shade, water heater shell, stretching tank, etc., is one of the largest amount of aluminum alloy sheet and strip deep processing products.
Production line technical features:
1, CNC automatic, the production line from the coil unwinding, until the whole roll of materials are completed, do not need manual contact with any materials, do not need any adjustment, fundamentally eliminate the ordinary punching production safety hazards and product quality hazards.
2, the line can use the coil material directly for the production of round sheet, do not need to be slitter and cross-cutting treatment, reduce the production process, reduce the cost of production, reduce the possibility of damage to the surface of the coil, the production of round sheet to ensure no oil, no scratches.
3, this line makes full use of the width of the coil, the use of high-precision servo motor drive system control, so that the disc spacing and the distance from the disc to the edge of the material is reduced to a minimum, fundamentally reduce the amount of waste, so that the utilization rate of raw materials reaches more than 80%.
4, the production speed can reach 40-55 pieces per minute, improve the production efficiency.
5, due to the modular mold design, when converting wafer production specifications, the conversion time can be reduced to less than 15 minutes. Discs can be produced in diameters ranging from 85 mm to 750 mm.
6, advanced uncoiling system, six-fold leveling machine, high rigidity mechanical press, automatic palletizing system, etc., to ensure the high quality of wafer products.
PRODUCT
| Thickness | 0.1-400mm，etc | Length: | 100-12000mm，or as required |
| Width | 20-3000mm，etc | Standard: | ASTM，AISI，JIS，GB， DIN，EN |
| Certification: | ISO, SGS，BV | ||
| Surface finish | mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc | ||
| Grade | 1000 Series: 1050 1060 1070 1100 1200 1235 etc. | ||
| 3000 Series: 3003 3004 3005 3104 3105 3A21 etc. | |||
| 5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc. | |||
| 6000 Series: 6061 6063 6082 6A02 etc. | |||
| 7000 Series: 7050 7475 7075 etc. | |||
| Temper | H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321. | ||
| Payment Terms | T/T, L/C at sight,West Union | Loading port | any port in China |
| Packing | standard export packing (inside:water proof paper,outside:steel covered with strips and pallets) | ||
| Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) | ||
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) | |||
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) | |||
Warehouse storage
Products are exported to Europe, the Middle East, Africa, the Americas, Southeast Asia, Australia and other more than 80 countries and regions. The cooperative factory covers an area of about 55,000 square meters, with a registered capital of 20 million yuan and fixed assets of 50 million yuan.
Packing and delivery
The main production of aluminum and aluminum alloy plate, strip, foil, tube, bar, profile and forging, forming aerospace, key projects, transportation, electronic information, packaging and printing, building decoration aluminum and other six series of pillar products.
Application area
We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.
Factory
Shandong Puchengcheng Metal Materials Co., Ltd. is a leading enterprise in China's aluminum products industry. In December 2020, Puchengxin was established; in June 2021, the company completed the acquisition of multiple factories and has a complete aluminum product production process and related supporting facilities.
Factory
Factory
Factory
Factory
Previous Article
Next Article
Previous Article
Next Article
FAQ
Are you a manufacturer?
We are a manufacturer and trader in one.
Can we visit the factory?
Customers are welcome to visit the factory.
How are the goods purchased shipped?
Export standard packaging.
What is the delivery time?
Depending on the quantity purchased, the usual delivery time is 7-12 days.
Do we have access to samples? What are the costs?
Samples are supported, depending on stock availability a sample fee is charged, if a sample fee is charged we will refund the sample fee when the customer orders the main goods.
How do we get a quote for a product?
Please send me the name, size, quantity and packaging requirements of the product you wish to order and we will then provide you with the most accurate and favourable price.
Shandong Puchengxin Metal Materials Co., LTD.
Tel：+86-17362283375
E-Mail：puchengxin@sdpuchengxin.com
WhatsApp：+8617362283375
Add:Gaoxin District, Liaocheng City, Shandong Province, China
