Shandong Puchengxin Metal Materials Co., LTD.
7075 T6 Aluminum flat bar
7075 T6 Aluminum flat bar is mainly used in the manufacture of aircraft structures and other high-stress structural parts requiring high strength and corrosion resistance, such as aircraft upper and lower wing wall panels, stringer, etc. Good plasticity after solution treatment, good heat treatment strengthening effect, good strength below 150 degrees, and has a particularly good low temperature strength, poor welding performance, a tendency to stress corrosion cracking. It is also widely used in mold processing, machinery and equipment, fixture, aerospace industry, blow molding (bottle) mold, ultrasonic plastic welding mold, golf ball head, shoe mold, paper plastic mold, foam molding mold, dewaxing mold, mechanical equipment, for the production of high-end aluminum alloy bicycle frame.
Keywords:
Series:
Product Details
Chemical composition: Si: 0.40; Copper Cu: 1.2 ~ 2.0; Magnesium Mg: 2.1 ~ 2.9; Zinc: 5.1 ~ 6.1; Manganese Mn: ≤0.30; Titanium Ti: ≤0.20; Cr: 0.18 ~ 0.28 Fe: 0.50; Aluminum Al: surplus
Mechanical properties: Tensile strength :524Mpa; 0.2% yield strength 455Mpa; Elongation :11%
7075 aluminum rod is known as ultra-high strength aluminum alloy, the yield strength of the alloy is close to the tensile strength, the yield ratio is high, the specific strength is high, but the plasticity and high temperature strength are low, should be used at room temperature, 120℃ below the load-bearing structural parts, the alloy is easy to process, has good corrosion resistance and high toughness. The alloy is widely used in aviation and aerospace and has become one of the most important structural materials in this field. 7075 is a cold-treated forged alloy with high strength, far better than mild steel. 7075 is one of the strongest alloys commercially available. General corrosion resistance, good mechanical properties and anodic reaction. The fine grain makes the deep drilling performance better, the tool wear resistance is enhanced, and the thread rolling is more different from the weight.
Application: 7075 is mainly used in the manufacture of aircraft structures and other high-stress structural parts requiring high strength and corrosion resistance, such as aircraft upper and lower wing wall panels, stringer, etc. Good plasticity after solution treatment, good heat treatment strengthening effect, good strength below 150 degrees, and has a particularly good low temperature strength, poor welding performance, a tendency to stress corrosion cracking. It is also widely used in mold processing, machinery and equipment, fixture, aerospace industry, blow molding (bottle) mold, ultrasonic plastic welding mold, golf ball head, shoe mold, paper plastic mold, foam molding mold, dewaxing mold, mechanical equipment, for the production of high-end aluminum alloy bicycle frame.
PRODUCT
| Thickness | 0.1-400mm，etc | Length: | 100-12000mm，or as required |
| Width | 20-3000mm，etc | Standard: | ASTM，AISI，JIS，GB， DIN，EN |
| Certification: | ISO, SGS，BV | ||
| Surface finish | mill,bright,polished,hair line,brush,sand Blast,checkered,embossed,etching,etc | ||
| Grade | 1000 Series: 1050 1060 1070 1100 1200 1235 etc. | ||
| 3000 Series: 3003 3004 3005 3104 3105 3A21 etc. | |||
| 5000 Series: 5005 5052 5083 5086 5154 5182 5251 5754 etc. | |||
| 6000 Series: 6061 6063 6082 6A02 etc. | |||
| 7000 Series: 7050 7475 7075 etc. | |||
| Temper | H12,H14,H16,H18,H20,H22,H24,H26,H28,H32,H36,H38,HO,H111,H112,H114,H116,H118,H321. | ||
| Payment Terms | T/T, L/C at sight,West Union | Loading port | any port in China |
| Packing | standard export packing (inside:water proof paper,outside:steel covered with strips and pallets) | ||
| Container size | 20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) | ||
| 40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) | |||
| 40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) | |||
Warehouse storage
Products are exported to Europe, the Middle East, Africa, the Americas, Southeast Asia, Australia and other more than 80 countries and regions. The cooperative factory covers an area of about 55,000 square meters, with a registered capital of 20 million yuan and fixed assets of 50 million yuan.
Packing and delivery
The main production of aluminum and aluminum alloy plate, strip, foil, tube, bar, profile and forging, forming aerospace, key projects, transportation, electronic information, packaging and printing, building decoration aluminum and other six series of pillar products. 
Application area
We also do our unremitting efforts to fight bravely for creating a national brand and international brand. Holding to the intellectual businessman of style and the spirit of sincerity, all staff of our company are willing to cooperate and develop together with you.
Factory
Shandong Puchengcheng Metal Materials Co., Ltd. is a leading enterprise in China's aluminum products industry. In December 2020, Puchengxin was established; in June 2021, the company completed the acquisition of multiple factories and has a complete aluminum product production process and related supporting facilities.
Factory
Factory
Factory
Factory
Previous Article
Next Article
Previous Article
Next Article
FAQ
Are you a manufacturer?
We are a manufacturer and trader in one.
Can we visit the factory?
Customers are welcome to visit the factory.
How are the goods purchased shipped?
Export standard packaging.
What is the delivery time?
Depending on the quantity purchased, the usual delivery time is 7-12 days.
Do we have access to samples? What are the costs?
Samples are supported, depending on stock availability a sample fee is charged, if a sample fee is charged we will refund the sample fee when the customer orders the main goods.
How do we get a quote for a product?
Please send me the name, size, quantity and packaging requirements of the product you wish to order and we will then provide you with the most accurate and favourable price.
Shandong Puchengxin Metal Materials Co., LTD.
Tel：+86-17362283375
E-Mail：puchengxin@sdpuchengxin.com
WhatsApp：+8617362283375
Add:Gaoxin District, Liaocheng City, Shandong Province, China
